MCP 2.0 Carburetor Correction Kit - KLR719 - 1987~2021 (All Models A,B,C and E) - Scroll all the way down to the bottom of the page to order.
CHOOSING THE RIGHT KIT: done using 3 factors: 1) Displacement - stock vs big bore, 2) Exhaust - stock vs aftermarket, 3) Air box - Stock vs Modified (either "L" mod or "4 hole" mod. (Simply doing the snorkel yank mod is still considered a stock air box for mcp kit selection).
WHAT YOU GET:
Included In The Kit:
The MCP 316 Stainless Needle,
1-2 Pilot Jets, 1-2 Main Jets,
Air Cut off vacuum port plug and cavity o ring to do the cut off mod
Fuel Tap Mod (modifies OE tap),
MCP stickers 1-2
Quick Setup Guide and Detailed Step By Step Installation Guide.
OPTIONAL ITEMS: (recommended)
MCP Air Cut Off Block Plate (Strongly advised)
MCP Brass Replacement Choke Nut (OE nut is plastic and prone to break)
MCP Thumb Mixture Screw (allows low speed mixture screw adjustment by hand)
If you don't get the air cut off block plate you must modify the OEM cut off cover. To do so you will need 2 part epoxy or JB Weld and 400 grit wet dry sand paper to block the port and level the warped OEM cut off cap.
WHAT MCP DOES:
MCP corrects the issues that plague the Kawasaki KLR650 fuel system by fixing the design flaws, eliminating unreliable pieces and completely remapping air/fuel delivery.
1) Backfiring and afterfiring are eliminated as long as the head pipe is NOT loose/leaking and as long as an appropriate muffler is fitted. There will be slight decel pop due to having to remove the cut off valve.
2) Surging while cruising and idling are eliminated
3) Dead spots in the throttle are eliminated
4) You get a drastic boost in torque (mid range and bottom end),
5) You get increased horsepower (will pull harder all the way to red line)
6) You get an incredible boost in throttle response - all throttle positions active and predictable.
7) You get instant power from idle on up & stronger/smoother idle.
8) MCP Preserves fuel economy (MCP 2.0 pushed fuel economy to near stock levels - higher in some cases)
9) Less vibration with MCP - due to no longer being on the edge of detonation from being overly lean.
10) MCP Stabilizes engine temperatures due to corrected mixtures
11) Easier to start your KLR with MCP
No Other Kit Does What MCP Does ! ! !
There will be some very slight decel pop under 3k rpm due to removing the cut off valve system, you can't buy a replacement cut off diaphragm that doesn't leak so there is no other choice.
United States shoppers please note, the USA imposed a 25% Duty and a 25% Tariff on all shipments entering the USA from Canada as of Aug 29th, 2025. These fees will be added on the check out screen. The GOOD news is, even with the extra 50% cost, it's still the best money you'll ever spend on your bike. It's that good.
